ARCHIVED Quality Assurance Authority

Attention! We’ve Moved! The Supply Manual has moved to the CanadaBuys website. Check out the new landing page for the Supply Manual.

Attention! As part of the Acquisitions Program’s transformation agenda, PSPC is planning to archive and migrate the SACC manual to the CanadaBuys website. The SACC manual will continue to be available on the BuyandSell website to ensure continuity of service during this transition period. At this time, an initial version of the archived version of the SACC has been posted on CanadaBuys. We encourage you to go visit the site and get comfortable with the new format of the SACC at the following:

Archived - Standard Acquisition Clauses and Conditions Manual | CanadaBuys

We appreciate your continued feedback and cooperation during this transition.

Archived Content

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

Legal text for SACC item

All work shall be subject to Government Quality Assurance (GQA) at the 
Contractor's facility or that of the Subcontractor(s) and at the 
installation site by the Director General Equipment Program Services (DGEPS), 
Department of National Defence, MGen. George R. Pearkes Building, 101 
Colonel By Drive, Ottawa, ON, K1A 0K2, or his designated Quality Assurance 
Representative, hereafter referred to as the QAR.

FOR CANADIAN CONTRACTORS

Within 48 hours of receipt of this contract, the Contractor shall contact 
the QAR.  The name, location and telephone number of the QAR can be 
obtained from the nearest Canadian Forces Quality Assurance Region (CFQAR) 
listed below:

Atlantic, 1 CFQAR/RAQFC - Halifax
Telephone:    (902) 427-7153

Quebec, 3 CFQAR/RAQFC - Montreal 
Telephone:    (514) 846-4610

National Capital, 4 CFQAR/RAQFC - Ottawa
Telephone:    (613) 991-4110

Ontario, 5 CFQAR/RAQFC - Toronto
Telephone:    (416) 952-2086

Manitoba/Saskatchewan, 7 CFQAR/RAQFC - Winnipeg
Telephone:     (204) 833-5533

Alberta, 7 CFQAR/RAQFC - Edmonton
Telephone:    (403) 973-4011, ext. 4317

British Columbia, 7 CFQAR/RAQFC - Vancouver
Telephone:    (604) 666-4136

FOR NON-CANADIAN CONTRACTORS

The Contractor will be notified by the DGPES as to the Government Agency or 
QAR with whom the Contractor must make arrangements for GQA.  This will 
normally be the Agency/QAR performing GQA in the Contractor's facility or 
area.  If the Contractor has not been contacted within 45 working days of 
receipt of the Contract, the Contractor shall notify the Contracting 
Authority.

FOR ALL CONTRACTORS

The Design Change, Deviation and Waiver Procedure as defined in National 
Defence Standard D-02-006-008/SG-001 shall apply to this Contract.

The Contractor is responsible for performing, or having performed, all 
inspections and tests necessary to substantiate that the materiel or 
services provided conform to contract requirements.

The Contractor shall provide, at no additional cost to the price of the 
Contract, all applicable test data, all Contractor technical data, test 
pieces and samples as may reasonably be required by the QAR to verify 
conformance to contract requirements.  The Contractor shall forward at his 
expense such technical data, test data, test pieces and samples to such 
location as the QAR may direct.

Quality Control, Inspection and Test records that substantiate conformance 
to the specified requirements, including records of corrective actions, 
shall be retained by the Contractor for three (3) years from the date of 
completion or termination of the Contract and shall be made available to 
the DND/QAR upon request.