Additional Package Markings - Different

Attention! We’ve Moved! The Supply Manual has moved to the CanadaBuys website. Check out the new landing page for the Supply Manual.

Item Information

ID
D2016C
Effective Date
2010-01-11
SACC Manual item status
Active
Parent Section
Delivery, Inspection and Acceptance
SACC Item usage
Full text

Revision History

Date Status ID Title
2010-01-11 Active D2016C Additional Package Markings - Different (2010-01-11) D2016C
2007-05-25 Superseded D2016C ARCHIVED: Additional Package Markings (2007-05-25) D2016C

Remarks – Recommended Use of SACC Item

Use the following clause in contracts when the Department of National Defence requires additional package markings and the markings will be different for some items.

Consult clause D2015C when the additional package markings are the same for all items.

Contracting officer must identify the item number and insert all applicable information in paragraph 1:

  1. specification number;
  2. manufacturer's name;
  3. drawing number;
  4. batch or lot number;
  5. qualification number;
  6. cure date of rubber components;
  7. data required by the contract or by the commodity specification;
  8. date of manufacture;
  9. date of repair or overhaul;
  10. name of repair or overhaul contractor;
  11. modification status;
  12. serial number; and
  13. expiration date of shelf life.

Legal text for SACC item

  1. The Contractor must ensure that in addition to the required interior and exterior package markings, the following information is provided:
    For item(s) ___________:
    1. __________ ;
    2. __________ ;
    For item(s) ________ :
    1. __________ ;
    2. __________ ;
  2. These markings must be applied and positioned in accordance with Canadian Forces Packaging Specification D-LM-008-002/SF-001.
Feedback about this web site