ARCHIVED General Conditions - Goods or Services (Low Dollar Value)

Attention! We’ve Moved! The Supply Manual has moved to the CanadaBuys website. Check out the new landing page for the Supply Manual.

As part of the Acquisitions Program’s transformation agenda, PSPC is planning to archive and migrate the SACC manual to the CanadaBuys website. The SACC manual will continue to be available on the BuyandSell website to ensure continuity of service during this transition period. At this time, an initial version of the archived version of the SACC has been posted on CanadaBuys. We encourage you to go visit the site and get comfortable with the new format of the SACC at the following:

Archived - Standard Acquisition Clauses and Conditions Manual | CanadaBuys

We appreciate your continued feedback and cooperation during this transition.

This information has been archived and replaced by General conditions: Goods or Services (Low Dollar Value) (2022-12-01) 2029

Archived Content

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

Legal text for SACC item

  • 01 Interpretation
  • 02 Standard Clauses and Conditions
  • 03 Status of the Contractor
  • 04 Condition of Material
  • 05 Inspection, Acceptance and Warranty
  • 06 Invoice Submission
  • 07 Taxes
  • 08 Transportation Costs
  • 09 Transportation Carriers' Liability
  • 10 Shipment Documentation
  • 11 Payment Period
  • 12 Interest on Overdue Accounts
  • 13 Audit
  • 14 Compliance with Applicable Laws
  • 15 Time of the Essence
  • 16 Ownership
  • 17 Government Property
  • 18 Amendment and Assignment
  • 19 Default by the Contractor
  • 20 Termination for Convenience
  • 21 Right of Set-off
  • 22 Conflict of Interest and Values and Ethics Codes for the Public Service
  • 23 Contingency Fees
  • 24 International Sanctions
  • 25 Integrity Provisions - Contract
  • 26 Entire Agreement
  • 27 Access to Information

2029 01 (2013-04-25) Interpretation

In the Contract, unless the context otherwise requires:

"Applicable Taxes" means the Goods and Services Tax (GST), the Harmonized Sales Tax (HST), and any provincial tax, by law, payable by Canada such as, the Quebec Sales Tax (QST) as of April 1, 2013;

"Articles of Agreement" means the clauses and conditions set out in full text or incorporated by reference from the Standard Acquisition Clauses and Conditions Manual to form the body of the Contract; it does not include these general conditions, any supplemental general conditions, annexes, the Contractor's bid or any other document.

"Canada", "Crown", "Her Majesty" or "the Government" means Her Majesty the Queen in right of Canada as represented by the Minister of Public Works and Government Services and any other person duly authorized to act on behalf of that minister or, if applicable, an appropriate minister to whom the Minister of Public Works and Government Services has delegated his or her powers, duties or functions and any other person duly authorized to act on behalf of that minister;

"Contract" means the Articles of Agreement, these general conditions and any other document specified or referred to as forming part of the Contract, all as amended by agreement of the Parties from time to time;

"Contracting Authority" means the person designated by that title in the Contract, or by notice to the Contractor, to act as Canada's representative to manage the Contract;

"Contractor" means the person, entity or entities named in the Contract to supply goods, services or both to Canada;

"Contract Price" means the amount stated in the Contract to be payable to the Contractor for the Work, exclusive of Applicable Taxes;

"Government Property" means anything supplied to the Contractor by or on behalf of Canada for the purposes of performing the Contract and anything acquired by the Contractor in any manner in connection with the Work, the cost of which is paid by Canada under the Contract;

"Party" means Canada, the Contractor, or any other signatory to the Contract and "Parties" means all of them;

"Total Estimated Cost", "Revised Estimated Cost", "Increase (Decrease)" on Page 1 of the Contract or Contract Amendment means an amount used for internal administrative purposes only that comprises the Contract Price, or the revised Contract Price, or the amount that would increase or decrease the Contract Price and the Applicable Taxes as evaluated by the Contracting Authority, and does not constitute tax advice on the part of Canada;

"Work" means all activities, services, goods, equipment, matters and things required to be done, delivered or performed by the Contractor under the Contract.

2029 02 (2008-05-12) Standard Clauses and Conditions

Pursuant to the Department of Public Works and Government Services Act, S.C. 1996, c.16, the clauses and conditions identified by number, date and title in the Contract are incorporated by reference and form part of the Contract as though expressly set out in the Contract.

2029 03 (2008-05-12) Status of the Contractor

The Contractor is an independent Contractor engaged by Canada to perform the Work. Neither the Contractor nor any of its personnel is engaged as an employee, servant or agent of Canada. The Contractor is responsible for all deductions and remittances required by law in relation to its employees.

2029 04 (2008-05-12) Condition of Material

Unless provided otherwise in the Contract, material supplied must be new and conform to the latest issue of the applicable drawing, specification and part number that is in effect on the bid solicitation closing date or, if there was no bid solicitation, the date of the Contract.

2029 05 (2010-01-11) Inspection, Acceptance and Warranty

  1. The Contractor must perform the Work efficiently in accordance with standards of quality acceptable to Canada and in full conformity with all the requirements of the Contract.
  2. All the Work is subject to inspection and acceptance by Canada. Despite inspection and acceptance of the Work by or on behalf of Canada and without restricting any provisions of the Contract or any condition, warranty or provision imposed by law, the Contractor, if requested by Canada to do so, must replace, repair or correct, at its own option and expense any work that becomes defective or fails to conform to the requirements of the Contract, where applicable. For goods, the warranty period will be twelve (12) months after delivery and acceptance of the Work or the length of the Contractor's or manufacturer's standard warranty period, whichever is longer.
  3. Canada must pay the transportation cost associated with returning the Work or any part of the Work to the Contractor's plant for replacement, repair or making good, and the Contractor must pay the transportation cost associated with forwarding the replacement or returning the Work or part of the Work when rectified to the delivery point specified in the Contract or to another location as directed by Canada. If, in the opinion of Canada, it is not expedient to remove the Work from its location, the Contractor must carry out any necessary repair or making good of the Work at that location and will be reimbursed its reasonable travel and living expenses.
  4. The warranty period is automatically extended by the duration of any period or periods where the Work is unavailable for use or cannot be used because of a defect or non-conformance during the original warranty period. The warranty applies to any part of the Work replaced, repaired or corrected pursuant to subsection 2, for the greater of:
    1. the warranty period remaining, including the extension, or
    2. ninety (90) days or such other period as may be specified for that purpose by agreement between the Parties.

2029 06 (2013-03-21) Invoice Submission

  1. Invoices must be submitted in the Contractor's name. The Contractor must submit invoices for each delivery or shipment; invoices must only apply to the Contract. Each invoice must indicate whether it covers partial of final delivery.
  2. Invoices must show:
    1. the date, the name and address of the client department, item or reference numbers, deliverable/description of the Work, contract number, Client Reference Number (CRN), Procurement Business Number (PBN), and financial code(s);
    2. details of expenditures (such as item, quantity, unit of issue, fixed time labour rates and level of effort, subcontracts, as applicable) in accordance with the Basis of Payment, exclusive of Applicable Taxes;
    3. deduction for holdback, if applicable;
    4. the extension of the totals, if applicable; and
    5. if applicable, the method of shipment together with date, case numbers and part or reference numbers, shipment charges and any other additional charges.
  3. Applicable Taxes must be specified on all invoices as a separate item along with corresponding registration numbers from the tax authorities. All items that are zero-rated, exempt or to which Applicable Taxes do not apply, must be identified as such on all invoices.
  4. By submitting an invoice, the Contractor certifies that the invoice is consistent with the Work delivered and is in accordance with the Contract.

2029 07 (2013-03-21) Taxes

  1. Federal government departments and agencies are required to pay Applicable Taxes.
  2. Applicable Taxes will be paid by Canada as provided in the Invoice Submission section. It is the sole responsibility of the Contractor to charge Applicable Taxes at the correct rate in accordance with applicable legislation. The Contractor agrees to remit to appropriate tax authorities any amounts of Applicable Taxes paid or due.
  3. The Contractor is not entitled to use Canada’s exemptions from any tax, such as provincial sales taxes, unless otherwise specified by law. The Contractor must pay applicable provincial sales tax, ancillary taxes, and any commodity tax, on taxable goods or services used or consumed in the performance of the Contract (in accordance with applicable legislation), including for material incorporated into real property.
  4. In those cases where Applicable Taxes, customs duties, and excise taxes are included in the Contract Price, the Contract Price will be adjusted to reflect any increase, or decrease, of Applicable Taxes, customs duties, and excise taxes that will have occurred between bid submission and contract award. However, there will be no adjustment for any change to increase the Contract Price if public notice of the change was given before bid submission date in sufficient detail to have permitted the Contractor to calculate the effect of the change.
  5. Tax Withholding of 15 Percent – Canada Revenue Agency

Pursuant to the Income Tax Act, 1985, c. 1 (5th Supp.) and the Income Tax Regulations, Canada must withhold 15 percent of the amount to be paid to the Contractor in respect of services provided in Canada if the Contractor is not a resident of Canada, unless the Contractor obtains a valid waiver from the Canada Revenue Agency. The amount withheld will be held on account for the Contractor in respect to any tax liability which may be owed to Canada.

2029 08 (2010-01-11) Transportation Costs

If transportation costs are payable by Canada under the Contract and the Contractor makes the transportation arrangements, shipments must be made by the most direct and economical means consistent with normal shipping practice. The costs must be shown as a separate item on the invoice.

2029 09 (2010-01-11) Transportation Carriers' Liability

The federal government's policy of underwriting its own risks precludes payment of insurance or valuation charges for transportation beyond the point at which ownership of goods passes to the federal government (determined by the FOB point or Incoterms). Where increased carrier liability is available without charge, the Contractor must obtain the increased liability for shipment.

2029 10 (2008-05-12) Shipment Documentation

For the shipment of goods, the transportation bill of lading must accompany the original invoice, except for "collect" shipments (if and when stipulated), in which event it must accompany the shipment. In addition, a packing slip must accompany each shipment, showing item, quantity, part or reference numbers, description of the goods and contract number, including the CRN and PBN. If the goods have been inspected at the Contractor's plant, the signed inspection voucher must be attached to the packing slip normally enclosed in the packing note envelope.

2029 11 (2008-05-12) Payment Period

  1. Canada's standard payment period is thirty (30) days. The payment period is measured from the date an invoice in acceptable form and content is received in accordance with the Contract or the date the Work is delivered in acceptable condition as required in the Contract, whichever is later. A payment is considered overdue on the 31st day following that date and interest will be paid automatically in accordance with section 12.
  2. If the content of the invoice and its substantiating documentation are not in accordance with the Contract or the Work is not in acceptable condition, Canada will notify the Contractor within fifteen (15) days of receipt. The 30-day payment period begins upon receipt of the revised invoice or the replacement or corrected Work. Failure by Canada to notify the Contractor within fifteen (15) days will only result in the date specified in subsection 1 to apply for the sole purpose of calculating interest on overdue accounts.

2029 12 (2008-12-12) Interest on Overdue Accounts

  1. For the purposes of this section:

    "Average Rate" means the simple arithmetic mean of the Bank Rates in effect at 4:00 p.m. Eastern Time each day during the calendar month which immediately before the calendar month in which payment is made;

    "Bank Rate" means the rate of interest established from time to time by the Bank of Canada as the minimum rate at which the Bank of Canada makes short term advances to members of the Canadian Payments Association;

    "date of payment" means the date of the negotiable instrument drawn by the Receiver General for Canada to pay any amount under the Contract;

    an amount becomes "overdue" when it is unpaid on the first day following the day on which it is due and payable according to the Contract.

  2. Canada will pay the Contractor simple interest at the Average Rate plus 3 percent per year on any amount that is overdue, from the date that amount becomes overdue until the day before the date of payment, inclusive. The Contractor is not required to provide notice to Canada for interest to be payable.
  3. Canada will pay interest in accordance with this section only if Canada is responsible for the delay in paying the Contractor. Canada will not pay interest on overdue advance payments.

2029 13 (2008-05-12) Audit

The amount claimed under the Contract is subject to government audit both before and after payment is made. The Contractor must keep proper accounts and records of the cost of performing the Work and keep all documents relating to such cost for six (6) years after it receives the final payment under the Contract.

2029 14 (2008-05-12) Compliance with Applicable Laws

The Contractor must comply with all laws applicable to the performance of the Contract. The Contractor must provide evidence of compliance with such laws to Canada at such times as Canada may reasonably request.

The Contractor must obtain and maintain at its own costs all permits, licences, regulatory approvals and certificates required to perform the Work. If requested by the Contracting Authority, the Contractor must provide a copy of any required permit, licence, regulatory approvals or certificate to Canada.

2029 15 (2008-05-12) Time of the Essence

It is essential the Work be delivered within or at the time stated in the Contract.

2029 16 (2008-05-12) Ownership

Unless provided otherwise in the Contract, the Work or part of the Work belongs to Canada after delivery and acceptance by or on behalf of Canada. Despite any transfer of ownership, the Contractor is responsible for any loss or damage to the Work or any part of the Work until it is delivered to Canada in accordance with the Contract.

2029 17 (2008-05-12) Government Property

The Contractor must take reasonable and proper care of all Government Property while it is in its possession or subject to its control. The Contractor is responsible for any loss or damage resulting from its failure to do so other than loss or damage caused by ordinary wear and tear.

2029 18 (2008-05-12) Amendment and Assignment

The Contract must not be amended or assigned, in whole or in part, without the prior written agreement of the Parties.

2029 19 (2008-05-12) Default by the Contractor

If the Contractor is in default in carrying out any of its obligations under the Contract, or is bankrupt or insolvent or in receivership, the Contracting Authority may, by giving written notice to the Contractor, terminate for default the Contract or part of the Contract. Upon the giving of such notice, the Contractor will have no claim for further payment and remains liable to Canada for all losses and damages suffered by Canada because of the default, including any increase in the cost incurred by Canada in procuring the Work from another source.

2029 20 (2008-05-12) Termination for Convenience

At any time before the completion of the Work, the Contracting Authority may, by giving notice to the Contractor, terminate for convenience the Contract or part of the Contract. In such case, the Contractor will be paid for Work that has been performed, accepted and unpaid in accordance with the Contract price. The Contractor will be entitled to be reimbursed the actual costs reasonably and properly incurred as a direct result of the termination, but in no case such reimbursement must exceed the Contract price. The Contractor will have no claim for damages, compensation, loss of profit or otherwise, except as provided in this section.

2029 21 (2008-05-12) Right of Set-off

Without restricting any right of set-off given by law, Canada may set-off against any amount payable to the Contractor under the Contract, any amount payable to Canada by the Contractor under the Contract or under any other current contract. Canada may, when making a payment pursuant to the Contract, deduct from the amount payable to the Contractor any such amount payable to Canada by the Contractor which, by virtue of the right of set-off, may be retained by Canada.

2029 22 (2008-05-12) Conflict of Interest and Values and Ethics Codes for the Public Service

The Contractor acknowledges that individuals who are subject to the provisions of the Conflict of Interest Act, 2006, c. 9, s. 2, the Conflict of Interest Code for Members of the House of Commons, the Values and Ethics Code for the Public Service or all other codes of values and ethics applicable within specific organizations cannot derive any direct benefit resulting from the Contract.

2029 23 (2008-12-12) Contingency Fees

The Contractor certifies that it has not, directly or indirectly, paid or agreed to pay and agrees that it will not, directly or indirectly, pay a contingency fee for the solicitation, negotiation or obtaining of the Contract to any person, other than an employee of the Contractor acting in the normal course of the employee's duties. In this section, "contingency fee" means any payment or other compensation that depends or is calculated based on a degree of success in soliciting, negotiating or obtaining the Contract and "person" includes any individual who is required to file a return with the registrar pursuant to section 5 of the Lobbying Act, 1985, c. 44 (4th Supplement).

2029 24 (2012-07-16) International Sanctions

  1. Persons in Canada, and Canadians outside of Canada, are bound by economic sanctions imposed by Canada. As a result, the Government of Canada cannot accept delivery of goods or services that originate, either directly or indirectly, from the countries or persons subject to economic sanctions.
  2. The Contractor must not supply to the Government of Canada any goods or services which are subject to economic sanctions.
  3. The Contractor must comply with changes to the regulations imposed during the period of the Contract. The Contractor must immediately advise Canada if it is unable to perform the Work as a result of the imposition of economic sanctions against a country or person or the addition of a good or service to the list of sanctioned goods or services. If the Parties cannot agree on a work around plan, the Contract will be terminated for the convenience of Canada in accordance with section 20.

2029 25 (2014-03-01) Integrity Provisions - Contract

  1. The Contractor agrees to comply with the Code of Conduct for Procurement and to be bound by its terms. In addition, the Contractor must also comply with the terms set out in these Integrity Provisions.
  2. The Contractor confirms that it understands that, to ensure fairness, openness and transparency in the procurement process, the commission of certain acts or offences may result in a termination for default under the Contract. If the Contractor made a false declaration in its bid, makes a false declaration under the Contract, fails to diligently maintain up-to-date the information requested, or if the Contractor or any of the Contractor's Affiliates fail to remain free and clear of any acts or convictions specified in these Integrity Provisions during the contract period, such false declaration or failure to comply may result, following a notice period, in a termination for default under the Contract. The Contractor understands that a termination for default will not restrict Canada’s right to exercise any other remedies that may be available against the Contractor and agrees to immediately return any advance payments.
  3. Affiliates
    For the purpose of these Integrity Provisions, everyone, including but not limited to organizations, bodies corporate, societies, companies, firms, partnerships, associations of persons, parent companies and subsidiaries, whether partly or wholly-owned, as well as individuals and directors, are Contractor's Affiliates if:
    1. directly or indirectly either one controls or has the power to control the other, or
    2. a third party has the power to control both.
    Indicia of control, include, but are not limited to, interlocking management or ownership, identity of interests among family members, shared facilities and equipment, common use of employees, or a business entity created following the acts or convictions specified in these Integrity Provisions which has the same or similar management, ownership, or principal employees, as the case may be.
  4. The Contractor who is incorporated or who is a sole proprietorship has already provided a list of names of all individuals who are directors of the Contractor or the name of the owner. The Contractor who has submitted a bid as a joint venture has already provided a list of names of all directors, or the name of the owner, for each member of the joint venture. The Contractor must diligently inform Canada in writing of any changes affecting the list of names of directors during the contract period. The Contractor must also, when requested, provide Canada with properly completed and signed consent forms and associated information, and cooperate to the verification process.
  5. The Contractor certifies that it is aware, and that its Affiliates are aware, that Canada may verify the information provided by the Contractor, including the information relating to the acts or convictions specified in these Integrity Provisions through independent research, use of any government resources or by contacting third parties.
  6. The Contractor certifies that neither the Contractor nor any of the Contractor's Affiliates have directly or indirectly, paid or agreed to pay, and will not, directly or indirectly, pay a contingency fee to any individual for the solicitation, negotiation or obtaining of the Contract if the payment of the fee would require the individual to file a return under section 5 of the Lobbying Act.
  7. Time Period
    The Time Period is 10 years and is measured from the date of the conviction or from the date of the conditional or absolute discharge.
    In addition, for a conviction under paragraphs a. or b. of subsection 8, following the 10-year period, a pardon or a record suspension must have been obtained, or capacities must have been restored by the Governor in Council. The Contractor must therefore provide a copy of confirming documentation from an official source for its certification to be found true by Canada for the purpose of these Integrity Provisions.
  8. The Contractor certifies that neither the Contractor nor any of the Contractor’s Affiliates have been convicted of an offence or received a conditional or an absolute discharge under any of the following provisions, unless the time period, as defined in the Time Period subsection, has elapsed:
    1. paragraph 80(1)(d) (False entry, certificate or return), subsection 80(2) (Fraud against Her Majesty) or section 154.01 (Fraud against Her Majesty) of the Financial Administration Act, or
    2. section 121 (Frauds on the government and Contractor subscribing to election fund), section 124 (Selling or Purchasing Office), section 380 (Fraud) for fraud committed against Her Majesty or section 418 (Selling defective stores to Her Majesty) of the Criminal Code, or
    3. section 119 (Bribery of judicial officers, etc), section 120 (Bribery of officers), section 346 (Extortion), sections 366 to 368 (Forgery and other offences resembling forgery), section 382 (Fraudulent manipulation of stock exchange transactions), section 382.1 (Prohibited insider trading), section 397 (Falsification of books and documents), section 422 (Criminal breach of contract), section 426 (Secret commissions), section 462.31 (Laundering proceeds of crime) or sections 467.11 to 467.13 (Participation in activities of criminal organization) of the Criminal Code, or
    4. section 45 (Conspiracies, agreements or arrangements between competitors), section 46 (Foreign directives), section 47 (Bid rigging), section 49 (Agreements or arrangements of federal financial institutions), section 52 (False or misleading representation), section 53 (Deceptive notice of winning a prize) of the Competition Act, or
    5. section 239 (False or deceptive statements) of the Income Tax Act, or
    6. section 327 (False or deceptive statements) of the Excise Tax Act, or
    7. section 3 (Bribing a foreign public official), section 4 (Accounting), or section 5 (Offence committed outside Canada) of the Corruption of Foreign Public Officials Act, or
    8. section 5 (Trafficking in substance), section 6 (Importing and exporting), or section 7 (Production of substance) of the Controlled Drugs and Substance Act.
    The Contractor also certifies that no one convicted under any of the provisions under a. or b. are to receive any benefit under the Contract, unless a pardon or a record suspension has been obtained or capacities restored by the Governor in Council, as defined in the Time Period subsection.
  9. Foreign Offences
    The Contractor also certifies that, within a period, as defined in the Time Period subsection, neither the Contractor nor any of the Contractor’s Affiliates have been convicted or have received a conditional or an absolute discharge, under any foreign offence that Canada deems to be of similar constitutive elements to the offences listed in these Integrity Provisions. Canada will also consider foreign measures declared by Canada to be similar in nature to a Canadian pardon, record suspension, or restoration of capacities by the Governor in Council.
  10. Subcontractors
    The Contractor must ensure that subcontracts include Integrity Provisions no less favourable to Canada than those imposed in the Contract.
  11. Non-application
    For governments, as well as entities controlled by a government, including Crown corporations, the present Integrity Provisions are reduced to complying with article 750 of the Criminal Code, the Government Contracts Regulations and the Code of Conduct for Procurement.

2029 26 (2008-05-12) Entire Agreement

The Contract constitutes the entire and sole agreement between the Parties.

2029 27 (2012-07-16) Access to Information

Records created by the Contractor, and under the control of Canada, are subject to the Access to Information Act. The Contractor acknowledges the responsibilities of Canada under the Access to Information Act and must, to the extent possible, assist Canada in discharging these responsibilities. Furthermore, the Contractor acknowledges that section 67.1 of the Access to Information Act provides that any person, who destroys, alters, falsifies or conceals a record, or directs anyone to do so, with the intent of obstructing the right of access that is provided by the Access to Information Act is guilty of an offence and is liable to imprisonment or a fine, or both.